Alfa Romeo Forums banner

69 Spider Nerf Bar fasteners

4K views 7 replies 5 participants last post by  aldo 
#1 ·
I took a little time to try and replicate the hex head screws for the nerf bar. I bought the necessary screws, nuts and washers from Ace Hardware.

I sanded the raised text, then polished and buffed. The hardest part was doing the washers.

Yes, I know, I didn't replate the spacer.
 

Attachments

See less See more
5
#7 ·
Thank you, Aldo. The car has been in cold storage since about 2008. Its been only in the last couple of months thatI've picked up the tools, again.

The last few weeks I've been struggling with the top frame. When I had it powder coated in the early 2000's, I had no idea that a couple of the pieces were horribly twisted.

I was fortunate and sourced a new to me frame. I've dissembled it and am in the process of cobbling together a fully functional frame.

The bumpers are getting polished and buffed. I should have them back next week. Once I get them mounted, I'll post some pictures.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top