Have a NOS tapered shaft but no housing or yoke.

 

Great, i will let you know. Might have a source for both housing and shaft.

 

I've got a yoke kicking around from my '76, I'll find it tomorrow

 

Please let me know if you do. Thanks.

 

Be aware there are 3 versions of the Alfetta yokes. The last/later one both centers better and is more durable. This is the rear yoke/coupling used on our 1 piece driveshaft on the GTV6 racecars with the front being a standard V6 arrangement.

 

I have a NOS straight shaft if you end up going that way.

Alfar7 might have a straight shaft clutch housing.

 

So in my stash of parts stuff, I found a straight shaft housing and shaft. Still looking for the yoke. I am almost positive the it's the smallest one with a measurement of 2 7/8 "

 

I found mine. I'll measure it and PM you if it's the correct one.

 

I have a couple of NOS housings in the UK. PM for more info.

 

Alex, thanks for the offer, but I have it back together again.

 

Hi,I have clutch housings.email if you still need . where r u located for shipping?

 

SOLD....I have these two covers...plus driveshafts and brake calipers and other used Alfetta parts....PM

 

I got it back together again, thanks for reaching out.