I'm trying to solve a CSI no squirt problem. Hooked up 12 volts to the csi and had a solid flow. Going to test the tts tomorrow. I know there are 2 temp sensors, 1 for fi and one for the ecu. My question is are these 2 sensors interchangeable? Are they the same part? They're cheap enough that...

Trying out tester to see if I can locate CDS fault. Get message about p6 ecu ground ( in German and translation may not be so good) which is brake sensor. Says to ground p6 but really can’t get to sensor to do this or ohm check. I did pull off brake pressure sensor connection and clean ...

Here's my ride for tomorrow. Driving the Lane Museum's Zagato in the Rally for the Lane. This should be fun! Our car last year was the formerly Brigitte Bardot-owned Simca Weekend roadster. I wanted something a little quicker this year!

hello, i have for sale some NOS parts from a collection of parts: most are from a 1750/2000 berlina but some are for more models combined shipping possible. more to come

Want to buy a used 164L pressure plate for mock up purposes. Eyeing doing another v6 swap and don’t want to get another 164 flywheel redrilled ( $$$ ) for an SVO pressure plate