My newly rebuilt transaxle with new clutch components started making a rattling noise upon cold start, it goes away for the most part when everything is warmed up. I took a video with sound that I uploaded below. For whatever reason, the video really isolated the rattling while drowning out engine and exaust, it doesnt sound that loud to me with engine running. Any guesses as to what is going on?
73alfetta
Is that saucer shaped piece between the clutch housing and the three-eared yolk loose? It kind of looks like it shifts around in the video, but it might just be the movement of the camera and the lighting.
I once had a loose slinger in the middle of the driveshaft and it made a similar kind of rattle.
I once had a loose slinger in the middle of the driveshaft and it made a similar kind of rattle.
Thanks. I checked the saucer and is not loose. I did check the clutch fork and i think it might be coming from there. Would lack of grease where the slave piston meets the fork cause this noise?
There is no change with clutch engaged or disengaged. Only change occurs with heat, gets quieter.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
