105 series steel wheel questions
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Bonaldi Brake Servo Fitting
Suspension, Steering, Brakes, Wheels & TiresOn my '67 GTV single brake servo system, it turns out that the new Bonaldi servo I bought, from Classic Alfa, did not come with the outlet fitting (presumably a 90 degree fitting?). This is the fitting that is necessary to connect the vacuum hose from the servo to the inlet manifold. And, to...- 0
- 33
-
Driver's side sitting 1" lower
Suspension, Steering, Brakes, Wheels & TiresHello! '73 Spider 2000. I have been experiencing some excessive wear on the outside tread on driver's side front tire. This was present when I bought the car, but now after having replaced the old tires with CN36's the problem persists (I had mistakenly thought the previous owner just put on...- 2
- 228
-
Brake Fluid Reservoir Rubber Insert
Suspension, Steering, Brakes, Wheels & TiresDoes anyone know where to source the rubber insert that goes under the screen of a dual reservoir master cylinder (1973 GTV). The principal suppliers do not seem to have it. Photo below. If not, any idea is there is any harm not having one? Thanks. Sent from my iPad using Tapatalk- 1
- 299
-
Dn86gtresto · updated
-
VIC Auto Sports
Suspension, Steering, Brakes, Wheels & TiresHi Has anyone had any experience with the brake boosters sold by VIC Auto Sports? I needed one badly and they were the only ones that had them in stock.- 11
- 502
-
Removing t-bar bush
Suspension, Steering, Brakes, Wheels & TiresHi all alfisti, I am sorry for my poor english I saw on the net that removing the bushes is not so easy. So here is my method to remove without welding. Feel free to comment negative or positive advice I simply cut with a grinder, 2 space that are right in front of inner bush and push out...- 0
- 91
Join now to ask and comment!