Alfa Romeo Forums banner

Will my 1600 engine fitt in a 1964 giulia Sprint?

3033 Views 9 Replies 6 Participants Last post by  Veloce 68
Hi , i have a 1600 motor with the following chassi number
AR 00526A , and i would like to know if possible what model alfa romeo it came from
And if it will fitt a Alfa romeo Giulia Sprint from 1964
Thanks
Regards

See less See more
1 - 10 of 10 Posts
No, this engine has the oilfilter on the wrong place. this kinfd of oilfilter will get in competition with the steering box. It is possible, relocate the oil filter. A lot easier is to find a engine with the oilfilter mount on the right place. The old version of 1300 1600 and 1750 engines.

this engine is 105.26s AR00526A*S Giulia Nuova Super 1600 74-76 nothing special.

regards, Kay
Thank you for your response do you have a photo of where the steering box is on a Giulia sprint ?
This is what is currently inside the alfa romeo giulia sprin ,and the oil filter seems to be in the same place and does not conflict with the steering box, or was maybe the steering box relocated?
Regards
See less See more
No, this engine has the oilfilter on the wrong place. this kinfd of oilfilter will get in competition with the steering box. It is possible, relocate the oil filter. A lot easier is to find a engine with the oilfilter mount on the right place. The old version of 1300 1600 and 1750 engines.

this engine is 105.26s AR00526A*S Giulia Nuova Super 1600 74-76 nothing special.

regards, Kay
That's not correct. Giulia Sprint, not Giulietta Sprint. Steering box has no effect on oil filter housing in this case. 00526A's not period correct, but will fit.
Thank you for your response , i thought so
Regards
The only visual giveaways if you fit it are the spin on oil filter and the two front tabs for the cam cover tie down. The early GTs didnt have these and leaked a fair bit from this spot. Put a dipped cam cover on and crossover filters and your car will look and sound as it should. Good luck!
Def will fit, and a remote oil filter is an easy add on even though not needed
later engine is stronger so what you have is great
go for it
The only visual giveaways if you fit it are the spin on oil filter and the two front tabs for the cam cover tie down. The early GTs didnt have these and leaked a fair bit from this spot. Put a dipped cam cover on and crossover filters and your car will look and sound as it should. Good luck!
Thank you guys for the help
Best regards
Dear frıend ..

Yes ,the 1600 lıter engıne (seen ın the pıcture ) wıll fıt ın a 1964 Gıulıa sprınt wıthout any trouble ..You won't have any trouble wıth steerıng box eıghter burman or zf ..

I have 2.0 lt engıne where oıl fılter ıs the same sıde with the engıne ı saw ın your post .

Regards.
Murat
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top