Alfa Romeo Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3,771 Posts
Can you put up a picture of your wheels? I'd like to see them.

I have been running 16 X 7.5 et 37 for a few months now. I had to go to kragen first off and buy 12mm X 1.25 lug nuts (they don't have ends on them, they screw down until they reach the wheel.)

On my car, 205/50/16 gave me serious rubbing issues. I couldn't even move the car. After reducing the castor (making it more positive) I was able to move the tire and wheel far enough foward so that it wouldn't rub on the rear of the wheel well anymore. Even with ET 37, when I hit a large bump, the tire would hit the top of the fender lip. I had to "flare" (beat on it with a baseball bat and fender roller) to get it to clear. ET 30 should be even worse! However, if you leave the car at stock ride height and don't hit huge bumps, you might be OK.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top