[demsaul]

Does anyone know what tool to use to install a Wheel Center Cap; I have the Snap Ring to install the piece - any ideas? Here is a link to the parts I purchased
Alfa Romeo and Fiat Wheel Center Caps
Alfa Romeo and Fiat Wheel Center Caps

Thanks!

Debbie

 

[intune]

I removed a few last week. I thought I would have to use snap ring pliers, but they came out easily with an awl. The center cap popped out with a tap from behind. I replaced it by pushing it back in. I replaced the clip by inserting one end of the ring in the groove and working it around until the other end snapped in. It wasn't a very strong clip, so it wasn't hard at all.

 

[demsaul]

Thanks, I'll try that. Was concerned about scratching the cap and could not get it in.

 

[withersj]

sourcing '91 alfa veloce center caps

I just posted but saw your reply, IAP has them but they are not the right size (too large) need center caps for a 91 alfa veloce, the measurement is 40mm not 48mm as the ones IAP has. Thanks

I removed a few last week. I thought I would have to use snap ring pliers, but they came out easily with an awl. The center cap popped out with a tap from behind. I replaced it by pushing it back in. I replaced the clip by inserting one end of the ring in the groove and working it around until the other end snapped in. It wasn't a very strong clip, so it wasn't hard at all.