What wheel is this?
1 - 6 of 6 Posts
Melber Majors? Hard to tell from your pic. Or maybe Campy Americas? https://www.alfabb.com/bb/forums/car-restoration/272274-campy-america-resto.html#post5034970
Attachments
Joined
·
1,243 Posts
Those are called Mille Miglia wheels. Made for Alfa Romeo in the late 60's, early 70's. Commonly found in 14x6 size. Very rare wheels.
Joined
·
256 Posts
Sweet looking wheel!
1 - 6 of 6 Posts
Join the discussion
Recommended Reading
-
To weld or not to weld, that is the question.
GT (1963-1977)With due credit to Shakespeare, I face the dilemma of having to choose between cutting open and having to weld the deceptively perfect outer sills to get to the rust left behind by presvious owner, or to liberally spray-in the hidden inner sills and get as much waxoyl vapour into the crevasses...- 111
- 8K
-
sbadaro · updated
-
Is this a starter or distributor issue?
GT (1963-1977)So, an issue popped up yesterday, actually a couple of days back but it revealed itself yesterday. So a couple of day ago I noticed while starting the car there was a sort of a thudding sound just as I started it that wasn't there before. I think the sound happened on two starts and I kinda...- 11
- 163
-
mark248am · updated
-
Alfa GT restoration project
GT (1963-1977)Here we go again Haven't yet finished the restoration of my Alfa GTV6 https://www.alfabb.com/bb/forums/alfetta-gtv6-1972-1986/405777-alfa-gtv6-alfetta-gt-restoration-story-pakistan.html that I am knee deep in the restoration of the Alfa GT mentioned in the GTV6 post. Somehow I cannot access...- 45
- 5K
-
restoring an old bertone
GT (1963-1977)I bought her in 1998 and used her as daily transport for a couple of years (businesstrip to Germany in winter is interesting) got a promotion, and a company's car, put the now rather old car in storage until 2012 after stripping and sandblasting she spent 3 years in the welding shop and 2 years...- 10
- 580
-
Cams not centred on buckets - problem?
GT (1963-1977)Hi friends, I’m getting ready to install a new cylinder head and noticed all the exhaust cam lobes are a few mm out of alignment with the buckets. The intake cams are dead on centre. I know the buckets are meant to spin to create an even wear pattern, so maybe being offset is intended. I...- 9
- 396
Join now to ask and comment!