Alfa Romeo Forums banner

1 - 3 of 3 Posts

·
Trained (ex)Professional, , 1953-2018 RIP,
Joined
·
16,232 Posts
I believe the size is 30mm (1 1/8"). I took a deep well 6 point impact socket and ground down the circumference (at the nut end) so it would fit between the nut and the flange.
 

·
Registered
Joined
·
5,299 Posts
The TX output shaft is pretty long; I found that even a deep sprocket wasn't enough. I just got a 1 1/8 box wrench from Craftsman. 30 mm is the correct metric size.

Robert
 
1 - 3 of 3 Posts
Top