Alfa Romeo Forums banner
1 - 3 of 27 Posts

· Registered
416 Posts
Unless you have a continuing need for a press; take them to a shop that knows what to do. It'll be a lot easier! Also, sometimes they need to bore the i.d. of the bronze bushings to fit the o.d. of the arms.
I have a Harbor freight 12 ton press, that I use a lot.
Dis-assembly was pretty easy with it but you need a variety of diameter pipes, sockets, etc. to match the bushing diameters. I still used a machine shop to bore the i.d. of the bushings. Good luck.
1 - 3 of 27 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.