Wanted
1 - 2 of 2 Posts
Joined
·
2,067 Posts
Welcome to the board JP! I found one '87 on http://www.autotrader.com (in my home town actually) and a handful of them on http://www.collectorcartraderonline.com and http://pages.ebay.com/ebaymotors/. Good luck in your search!
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
vvt solenoid - is it really dead?
Spider - 105 & 115 Series (1966-1994)Hey guys, there is something that I learned today that I want to share with you. I condemned a new Spider owners vvt solenoid that we couldn't get to activate when applying 12v to it. He sourced a new one, and the the dead one stayed on my shelf. Tonight my curiosity took over and I decided to...- 21
- 3K
-
mcola · updated
-
A 115 Spider as a boy’s first car - the technical events
Spider - 105 & 115 Series (1966-1994)I have a similar thread over in the cast iron 2000 thread, mostly containing anecdotes and philosophy. I promised the mods not to foul the air over there with too much mechanical stuff, so that order can be maintained. Anyway, I finished the fuel pump replacement today, and finished sorting...- 48
- 2K
-
DPeterson3 · updated
-
Duetto convertible top header, Trunnion screw
Spider - 105 & 115 Series (1966-1994)Hi All, has anyone had to locate a source for the large headed screw that connects the Trunnions on the Duetto convertible top side frames to the header? I’m pretty sure I know what the answer is going to be but thought it was worth a try to ask. thanks for looking! Mark- 14
- 586
-
88 Alfa Spider cranks but won’t start
Spider - 105 & 115 Series (1966-1994)Purchased a 88 Spider that’s been sitting for two years with a full tank of gas without being started. I changed the fuel filter and started it up with starting fluid , at 1st on 3 cylinders and then eventually all four firing. Changed the spark plugs and cables and car ran great for one day...- 26
- 699
-
Aldo Luca · updated
-
Late Spiders Factory Rustproofing
Spider - 105 & 115 Series (1966-1994)Hi Everybody - My '84 has NO RUST - in part, thanks to the pebbly-textured rust proofing the factory put on the exterior sills. The question is, how does anybody clean and polish that area? There must be something better than a scrub brush. Any suggestions? Thanks, David O'D Laguna CA- 4
- 105
Join now to ask and comment!