Alfa Romeo Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,265 Posts
Discussion Starter · #1 ·
Hi guys, chasing a multi-rib crank pulley - Australian 164s only got v-belt pullies and I have a need for a multi-rib with the motronic toothed ring (later v6s got the multi-rib, but use the flywheel for the crank angle sensor)
Anyone got a good one they want to part with?
 

·
Registered
Joined
·
1,758 Posts
Hi guys, chasing a multi-rib crank pulley - Australian 164s only got v-belt pullies and I have a need for a multi-rib with the motronic toothed ring (later v6s got the multi-rib, but use the flywheel for the crank angle sensor)
Anyone got a good one they want to part with?
Hi - I've got one (in Melbourne) that you can have. PM me with your contact details.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top