Alfa Romeo Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
57 Posts
Discussion Starter #1
Hi All I am need of some Montreal cylinder liner/Barrel at least one.
I am restoring a Montreal engine and sadly one bore has corrosion damage beyond a hone so I would like some STD 80mm A spect or even B or C spec barrels.
Pistons are very good there are other options but I thought I would start here.
Any one Help please:)
 

·
Registered
Joined
·
57 Posts
Discussion Starter #3
Thank You

In actual fact thats where the engine came from and they don't have any spare liners.
It has been sitting for quite some time with water in a cylinder and by the time it came here (Australia) it was well and truly seized. I dought that Larry was aware of the water. He did an inspection and it turned OK. I can tell that there had been a lot of water in it the liner has a tide mark and so does the dizzy.
The piston is OK but not the liner.
 
1 - 4 of 4 Posts
Top