[emr5503]

Wanted - 7/8 Dunlop m. cyl rebuild kit

Not available from the usual sources. This is for a '65 GTA, single circuit, non servo system. Any leads appreciated.
Thanks,
Ed

 

[101 Alfa Mike]

Since 22 mm is 7/8", you might try getting some generic rebuild bits from your local parts store. I popped for a new m/c last time, but may try that route in the futue.

 

[emr5503]

Now that I have it in hand it is 7/8, not 22mm.
Thanks,
Ed

 

[1166]

You need a Dunlop/Girling kit SP 9000.

 

[emr5503]

1166,
Thanks !!!
Where did you find the p/n and who carries them?
Ed

 

[emr5503]

1166,
According to my BAP/Geon parts man there are no Dunlop/Girling 9000 part #'s (at least in his catalogs).
Are you sure about the # ?
Thanks,
Ed

 

[1166]

Positive! I am looking in my OLD Columbia Motor Corporation catalog and it lists SP 9000 for Dunlop cars. It is a 7/8" bore. I will check to see if I have some in the next week (a LOT of COMPLETELY unorganized 'things'...).