vvt big nut tool
1 - 5 of 5 Posts
Joined
·
3,671 Posts
Try this instead. Cannot be beat, especially for just under 9 U.K. pounds. He makes lots of good repro tools (not fancy, but work well, and the price is completely right) for our cars.
Inlet Camshaft Tool - A.5.0232 VVT Tool (A.5.0232) :: TotallyAlfa
Inlet Camshaft Tool - A.5.0232 VVT Tool (A.5.0232) :: TotallyAlfa
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
'86 Alfa Spider Quadrofoglio over heating
Engine Repair, Diagnostics & RebuildingGreetings! New member, new owner (well my wife anyway) We recently purchased an '86 Spider Quadrofoglio from the original owner, about 156k miles and all records included. It's in relatively great shape mechanically. However, recently while driving it began to over heat. Light came on sitting...- 6
- 260
-
oil pump and distributor alignment issue
Engine Repair, Diagnostics & RebuildingHi I have fully rebuilt my 1750 engine and set up the oil pump as per the book with the slot at the top of the shaft facing from front to back of engine when at top dead centre. the book shows the distributor rotor should point to the front of the engine. unfortunately the rotor is at 90degrees...- 9
- 196
-
-
Advance timing with Performance cams
Engine Repair, Diagnostics & RebuildingHi, I have installed Fast Road cams from Alfaholics on my 1973 GT veloce 2000. I have to say they really help the engine to rev better. When I started to tune ignition timing (I got a 123tune fully programable unit), I got very good torque at low to mid RPM (1200 to 3000), but Advance is way...- 4
- 145
-
Technical Questions And Rj`s Suggestions
Engine Repair, Diagnostics & RebuildingI get endless questions on engine building, cam issues and gearbox problems that I will share on this thread as others can benefit from the information. I will start a similar one on the transmission / transaxle area for those type questions.- 370
- 82K
-
Alfar7 · updated
Join now to ask and comment!