Hello, I own a 82 gtv2.0 and wanted to install an original AR voltmeter gauge in my dash, just below the oil pressure gauge. I once had a ride in a friend`s 82 Alfasud ti, and the car had 2 gauges by the shift level (one was a oil pressure gauge and I don`t rememeber the other one). Is it a voltmeter? Does anybody got a spare one or parted a car and has one left?
Voltmeter in Alfasud?
1 - 2 of 2 Posts
Joined
·
50 Posts
It would have been a water temperature guage.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Coolant reservoir Alfasud or 33
Boxer Engined Alfa RomeosG'day all, from NZ - one of our three Suds has a coolant reservoir that's started leaking under pressure, i.e. in normal hot running with the usual pressure cap on the reservoir. Nothing's changed in the car in terms of its useage or the reading on the temp gauge, but the leakage is gradually...- 5
- 227
-
1.7 8v Boxer Piston availability ?
Boxer Engined Alfa RomeosHi all, Some of the guys in the NZ Trofeo Series are having trouble finding replacement pistons for the 1.7L 8 valve boxer engines. Particularly oversized pistons. A restricted category we run in the series allows either a slightly modified 1500 or a standard 1700 8 valve engine. Lack of 1.7...- 8
- 4K
-
dave33 · updated
-
the flat 8 project
Boxer Engined Alfa RomeosI have just had a crank made for a flat 8 using two in-line/joined-together 'Sud boxer engine blocks. The idea is to do a home grown version of the Australian Gioccattolo mid-V8 of the '80's but using Alfa components as much as possible to retain the Alfa genes. A flat 12 engine as per the BB...- 122
- 59K
-
Wiring
Boxer Engined Alfa RomeosHi, My first post on any forum. I've owned my late 1993 33 1.7i.e. for 6 years and touch wood, nothing has gone wrong and the bodywork is free of rust. I bought her from the first owner when she had just over 33k miles. I have added another 7k. I have just had her back from the garage having had...- 1
- 153
-
Inboard brakes - caliper problem
Boxer Engined Alfa RomeosOne of my Sprint front caliper (left) is leaking by the handbrake adjuster. The car has inboard brake system. When someone brakes we can see brake fluid comming out of the caliper where the adjuster goes inside the caliper. Is it possible to repair or it must be replaced? Thanks- 13
- 2K
Join now to ask and comment!