Alfa Romeo Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
297 Posts
Definitely replace them all. Pulled the heads off the old mans 3.0 this weekend, it was getting pretty smokey. Its looked after the bores nicely though. Just wondering what valve guide seals you guys use. We have the higher temp rated ones to go in, but I thought i read somewhere of someone using Porsche 911 ones? Or am I dreaming....?
Cheers.
 

·
Registered
Joined
·
297 Posts
Definitely replace them all. Pulled the heads off the old mans 3.0 this weekend, it was getting pretty smokey. Its looked after the bores nicely though. Just wondering what valve guide seals you guys use. We have the higher temp rated ones to go in, but I thought i read somewhere of someone using Porsche 911 ones? Or am I dreaming....?
Cheers.
Okay so we looked into this, the 911 valves are 9mm stems but OD is larger, so would need to be sleeved...
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top