I am restoring two 750 Spiders and buying rubber parts from Centerline Alfa. The parts that they do not sell will be purchased from either Classic Alfa or Alfa Stop in England. I could also ask Reoriginals or Mr. Fiat for the parts. I believe that all of them purchase rubber parts from a supplier in Italy. I emailed the supplier, but they would not sell to an individual.
I am currently rebuilding a 1300 Veloce spider engine, but I am missing the air plenum to attach to 40 DCOE 2 carbs, and the air box.
Any condition considered.
There are brand new reproduction options available online, but the prices are eye watering.
Any help would be appreciated
After having little success removing the shoulder bolts from my 61' Giulietta spider(101)soft top frame,I realized that new shoulder bolts were in order My solution was to modify alloy steel shoulder bolts to look like and fit my 101 frame.I think they'd work for 750 frames too,but not...
I added fuel to my tank today for the first time and I have a leaking Fispa fuel filter/regulator. It seems to be coming out the top from a very small hole (vent or breather?) located in between the two of the four screws that connect the two major sections together...
Yes, I know not to post in two places, but since the part needed is strictly 750/101 I would imagine it will be seen here much easier than on the Wanted Forum.
Shock absorber clamp as used on 750 and 101 Spiders, and most likely Sprints.
It fits directly under the spring pan on the front...
Le prime 100 Giulietta Sprint Veloce
(telai serie AR1493 ‑ motori serie AR1315)
Numero Numero Data di Colore Primo proprietario Note
di telaio di motore produzione
01380 30001 24.04.1956 Rosso Carlo Guarneri, Brescia
01381 30002 23.04.1956 Rosso Scipione Paon, Verona
01430 30003 04.05.1956...