underhood hardware?
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Spring specifications for a fast road Super
Sedan (1962-1977)There has been a backroom discussion going on amongst a couple of us regarding the best spring specifications for a "fast road" Super. The challenge is that various vendors offer sport suspension springs for the Giulia Super that are advertised vaguely in terms of specifications and results...- 71
- 18K
-
dmericas · updated
-
Super getting some localized bodywork
Sedan (1962-1977)When I got my Super 15 years ago, it was nasty looking with dents, some bondo, a really nasty RR door, and poor paint, but luckily not much rust. I had the body done by a place in San Rafael in 2003 (now out of business, as seems to be the case with most body shops). They stripped it to bare...- 321
- 37K
-
Andrew · updated
-
Hood latch release spring
Sedan (1962-1977)Over the weekend, the spring for the primary latch on my super broke. See pic for what I'm referring to. I tried a generic spring but it isn't strong enough. Anybody ever replace one of these and can tell me what they used? Thank you PS I borrowed a pic from an old posting. I wish mine looked...- 4
- 73
-
1972 Alfa Romeo Giulia Super 1300
Sedan (1962-1977)Well, since I took delivery of my new to me Super, I thought it was time for the formal introduction. I sourced the car with the help of a member here in the Netherlands. It is a (believed) Blu Olandese AR-343 Super 1300. I have not really driven it, I mean it arrived this morning, but mostly...- 67
- 6K
-
xplorutah · updated
-
Out with the old in with the new
Sedan (1962-1977)The “chrome” trim pieces on my Nuova Super, has seen better days. I found an old stainless trim strip from an older super, compared sizes, and voila!- 5
- 514
-
VabeneGTV · updated
Join now to ask and comment!