Alfa Romeo Forums banner

Transaxel to rear g-bow

1K views 8 replies 4 participants last post by  Jerry Ehlers 
Is this a GTV6 or a Milano?

Be sure the pinch bolt is loose at the front end of the drive shaft, as well as the rear transaxle mount bolt and the 6 dedion front cross member bolts when you go to position the transaxle flange against the giubo. Ie, the t/a may need to be slid forward a little bit to be flush with it. You definitely don't want the giubo bolts to pull it back towards the flange, giving the zigzag.

Bill
 
Hi Jerry,

I don't have any Alfetta experience, but I don't think the Alfetta has a pinch bolt up front. The front transaxle mounts that are still available are for the Milano and have an extra plate welded to the bottom which should be removed for use with a GTV6 (and presumably the alfetta too).

Bill
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top