Torque settings front suspension

1 - 1 of 1 Posts

ellismp

Registered

Joined Feb 22, 2014

89 Posts

Discussion Starter • #1 • Mar 17, 2015

Hi does anyone have a complete list of the correct torque settings for a 1981 2000 Spider Veloce front suspension and steering?

I have the workshop manual but it doesn't list everything.

I hope I haven't missed a sticky on this - one would be very useful anyway!

Thanks!
Martin

1 - 1 of 1 Posts

Recommended Reading

Bonaldi Brake Servo Fitting

Suspension, Steering, Brakes, Wheels & Tires

On my '67 GTV single brake servo system, it turns out that the new Bonaldi servo I bought, from Classic Alfa, did not come with the outlet fitting (presumably a 90 degree fitting?). This is the fitting that is necessary to connect the vacuum hose from the servo to the inlet manifold. And, to...
- 0
- 57
- M
  mathcg · updated 2 d ago
Driver's side sitting 1" lower

Suspension, Steering, Brakes, Wheels & Tires

Hello! '73 Spider 2000. I have been experiencing some excessive wear on the outside tread on driver's side front tire. This was present when I bought the car, but now after having replaced the old tires with CN36's the problem persists (I had mistakenly thought the previous owner just put on...
- 2
- 287
- A
  alfaronto · updated 4 d ago
Brake Fluid Reservoir Rubber Insert

Suspension, Steering, Brakes, Wheels & Tires

Does anyone know where to source the rubber insert that goes under the screen of a dual reservoir master cylinder (1973 GTV). The principal suppliers do not seem to have it. Photo below. If not, any idea is there is any harm not having one? Thanks. Sent from my iPad using Tapatalk
- 1
- 301
- Dn86gtresto · updated 10 d ago
VIC Auto Sports

Suspension, Steering, Brakes, Wheels & Tires

Hi Has anyone had any experience with the brake boosters sold by VIC Auto Sports? I needed one badly and they were the only ones that had them in stock.
- 11
- 509
- N
  Nitrokid · updated 10 d ago
Removing t-bar bush

Suspension, Steering, Brakes, Wheels & Tires

Hi all alfisti, I am sorry for my poor english I saw on the net that removing the bushes is not so easy. So here is my method to remove without welding. Feel free to comment negative or positive advice I simply cut with a grinder, 2 space that are right in front of inner bush and push out...
- 0
- 96
- B
  bertonegt2000 · updated 10 d ago

Top

Torque settings front suspension

ellismp

Registered

Bonaldi Brake Servo Fitting

Driver's side sitting 1" lower

Brake Fluid Reservoir Rubber Insert

VIC Auto Sports

Removing t-bar bush