Alfa Romeo Forums banner

Stuck Speedo Cable

779 Views 1 Reply 2 Participants Last post by  Alfastruns
74 Spyder - I am in the process of replacing my speedo cable. It seems to be stuck in the gearbox. Is there anything I might have missed before I give it a good yank? I have replaced many cables over the years and they always came out pretty easy - curious why this one is so tight.
Thanks in advance.
1 - 2 of 2 Posts
The cable might have seized in the casing and the drive twisted it in the square drive . Had this happen before, a good hank and if not pull out the speedo drive from the trans and look at it on the bench.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top