What I need for my red 87 Quad is the small interior panel located at the back inside of the drivers side door that mounts the gas filler door latch and the trunk opening latch. Prefer black, but any color will do. Must mount both latches. Latches not required, only the mounting panel. Must be complete and in good solid condition.
Do you have the little black plastic trim insert that goes between the left side of the upper console and the lower right side of the dash.
(Please see attachment for the opposite side insert.)
i have the door panels in tan or black for 1987 spider veloce,
i have new shifter handles made of mahogany wood with alfa logo,
also i have the window visor for the passenger side with light and mirror,
please email me direct [email protected]
5 Used, circa 1982 five star in good condition. Will ship, you pay shipping cost
$50 each wheel or make offer for all 5 plus shipping
You may pick-up in Las Vegas, NV for free 😊
These weigh 12 lbs per wheel
14 X 5.5
The contacts are somewhat corroded and will require some patience to clean and lube but the plastic hasn't crumbled on these like many of them have. Front switches move to all three positions, albeit stiffly. Springs intact. Stainless covers are pretty nice. $18 each + shipping. $30 for 2...
These are the approx 1/4" thick bellhousing plates used in early Alfas. I'm pretty sure one is for a 1600 engine and I'm not sure about the other. If you look at the pictures you can see that while the engine stud holes line up, the starter position and mounting holes are not the same. One...