Alfa Romeo Forums banner

1 - 17 of 17 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1
Here's a nice clean used set of Speedline factory Alfa 147 Selespeed wheels being offered.
No dents or dings, although wheel-3 has the slightest sign of curbrash.

Wheel: Speedline Alfa 147 Selespeed
Size: 17x7
Offset: et40.5
PCD: 5x98

This set is a rare set of 17" optional wheels and will fit most 5x98 cars perfectly.
No need to worry about wobble bolts or hubcentric rings.
Would instantly modernize and add a flair of extra Euroness to your beloved Alfa.
Perfect centercaps and matching valvestem caps included.

Asking $900 shipped Greyhound GPX in CONUS.
Tires NOT included.

Link to gallery with HUGE pics: FS: Speedline Alfa Romeo 147 Selespeed 17x7 et40.5 5x98 $1000 - Minus







$900 fees included and shipped via Greyhound.
NO tires included.


 

·
Registered
Joined
·
27 Posts
Discussion Starter #4
Sorry I don't know the weight of the wheels.
I have them stored with tires but if you are interested in them I can dismount them during the week and let you know the weights.
 

·
Registered
Joined
·
445 Posts
The tires APPEAR to be in decent shape except for the one on the extreme left.... Are those going with the wheels?
 

·
Registered
Joined
·
27 Posts
Discussion Starter #6
The tires APPEAR to be in decent shape except for the one on the extreme left.... Are those going with the wheels?
Tires have plenty of tread left but are old and showing signs of dry cracking.
I ran them few years ago and then they sat on a parts car outside for last 2yrs.

Was planning on boxing wheels up without tires to ship.
 

·
Registered
Joined
·
27 Posts
Discussion Starter #8
Still here as I'm only advertising them on alfabb.
Open to reasonable offers and also willing to ship FedEx if GXP is a hassle.
 

·
Registered
Joined
·
27 Posts
Discussion Starter #10
^ Thanks for the pics. Your Q is looking mighty fine! :thumbup:

These have just been taking up room in storage. Still available and I'm open to reasonable offers.

Please don't make me buy another Alfa just to run these. :001_tongue:
 

·
Registered
Joined
·
27 Posts
Discussion Starter #17 (Edited)
Just purchased 1989 Milano Gold. Do you know if these will fit?
They will fit perfectly as far as sizing and offset is concerned.
However when running modern (post Milano) Alfa wheels on an Milano the centerbore must be opened up .5mm to fit over the hub.
Some have had good results with a file or dremel since the amount is so small.
Or you could run a spacer to eliminate this issue, anything over 2-3mm will work.

Just for reference I'll include a link to Milano's running this size wheel.
All but the top two cars in this link are running 17x7 wheels with 40mm offset: Type3 Milano gallery

Hope this helps and feel free to shoot an offer my way if you are interested.

~Teaguer
 
1 - 17 of 17 Posts
Top