Alfa Romeo Forums banner
1 - 1 of 1 Posts

·
Trained (ex)Professional, , 1953-2018 RIP
Joined
·
16,232 Posts
The factory method of bypassing the seatbelt interlock device is to cut wire #13 (black/green) at the device and electrically connect it to wire #10 (black/red). This will allow the starter relay to be triggered directly from the ignition switch whether seatbelts are on or not while still retaining the seatbelt buzzer and warning light if the belt is not buckled.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top