Alfa Romeo Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
477 Posts
Discussion Starter #1
Looking for Romablok over-center style clamps for my Giulietta heater hoses and radiator hoses.
I can use any sizes between 18 and 22mm, and between 40 and 44mm.

Joe
 

·
Premium Member
Joined
·
2,753 Posts
Spring clamps

Classicalfa EN116 $21.00 cut to fit
Cheers, Jon
 

·
Registered
Joined
·
477 Posts
Discussion Starter #3
Jon,
I am aware of these, but they are too large a radius to reshape to the sizes I need.

Joe
 

·
Certified Oldschooler
Joined
·
7,047 Posts
Mt Carmel Spares did a run recently. Don't know if they have any left.

PS: the lever flip clamps were only used AFAIK on the bigger air intake crossover tubes. The others were the claw and tab clamps.
 

·
Registered
Joined
·
116 Posts
Check with Gary Martin - that's where I got all mine, nicely restored. Gary's ad runs in Alfa Owner's Club magazine for carb rebuilding.
 

·
Registered
Joined
·
3,384 Posts
Sprint Veloce ready to start 8-14-14 006.jpg I used Copiglia clamps for my heater hoses, fuel lines and radiator hoses. I can send you information if you are interested in purchasing these clamps. They were used when the cars were new.
 
1 - 6 of 6 Posts
Top