[Ndv]

Hi

Can anyone recommend a good rolling road in the Greater London area / England.

Would need to be able to set/jet carbs, ie, old school rather than remapping. Dellorto, ideally stocks good variety of jets etc.

Any advice is welcome.

Thanks
Niels

 

[malcolm1]

Quite a way out of London, but I've hear good things about this guy, near Winchester
https://www.aireytuning.com/#classicandvintage

 

[Ndv]

thanks Malcolm, will check them out

 

[Alfamale 62]

Northampton Motorsport or emerald both about an hours drive if it's not rush hour

 

[Alex]

DK Engineering if you're feeling flush. Airey has an excellent reputation.

 

[Ndv]

thanks both, will check them out.

 

[75evo]

I suggest you talk to Richard Melvin, down in Hampshire (Bosham area). Reason being he is an Alfa expert and may know where to go dyno close by. From around Putney he is about 1.5 hours away.

 

[Bertiebloke]

Airey is currently needing cars left with him for a week as he is in a vulnerable Covid group (over 80!), but he did mine proud when I used him a year back.

I have recently been trying to contact both Andy Cattani down near Gatwick and Novatech in Slough both of whom also have good reputation but no response to phone calls or emails.

 

[Alfamale 62]

I have had to wait 8 weeks to get a 3 hour slot, they are all fully loaded everyone has finished off their projects due to covid and now want them tunned

 

[Ndv]

Just to revive this thread, and give feedback:
I ended up going to Regency Autos in Cambridge to get my car setup, and the results were very positive. Unfortunately due to Covid, it was not possible to attend the sessions, so went for a stroll through Cambridge and then picked up the car later. I can recommend them.
Thanks
Niels