Alfa Romeo Forums banner

rod bushings

733 views 2 replies 3 participants last post by  Andrew 
#1 ·
rebuilding a '74 2L. The wrist pin bushing in rod #3 turns inside the rod while the bushings in the other 3 rods do not . In the other three the bushing hole and drilled hole in the end of the rod are aligned and they do not move. As I removed the #3 rod from the engine I noticed the holes were not aligned and the bushing could be turned by hand. Is this a problem I need to fix?
 

Attachments

See less See more
1
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top