Removing dash from '65 GTV

2516 Views 8 Replies 7 Participants Last post by Heathgh, Jun 15, 2014

Biba69

Discussion Starter · Mar 19, 2011

Let's get this out of the way first: Should it bother you that a professional restorer asks questions, please do us all a favor and simply move on.

I've removed the four visible brackets holding the dash on - please note the year, it might be the only year the dash's were made this way. From underneath and on the forward edge (to the driver) there are 'about' six captive nuts with a bolt, from above, going through. All I can figure out is that they have to be going through the upper dash padding - except they don't. There is a 'new' cover for the top of the dash, but whoever did it had to be able to get the top off to recover it, then replace.

I've had some head scratchers on this project, but this is the first I've not been able to think through.

If necessary I'll send a photo.

Biba

Save

1 - 1 of 9 Posts

classicalfas

· #7 · Mar 20, 2011 (Edited)

Well said Antoni! I can't take this c rap any more. 101/105 whats your problem? Did he restore your car and you're not happy with it, if not then leave the guy alone. Your not contributing anything meaningful to this forum when you post comments like the ones directed towards Biba69. I know I, and I'm sure others on the Board would love not to see your child like comments posted.

I have an idea. Lets take a poll and see how many people on the Board think your an *******. How do YOU like it 101/105Guy.'

Save

1 - 1 of 9 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month