Rear Quarterlight Inner 'C' Trim
1 - 4 of 4 Posts
My way might not be the correct way, but the way I did it is I slid the big end of the C on the bottom molding and then slid clipped on the top part to the top molding. Then, using a heavy, rubber/plastic screwdriver, I held the shaft and banged in the "C" rearwards as much as possible, until it all lined up. All those stainless trim pieces are surprisingly strong, nothing got bent out of shape and everything just "clicked" into place.
As for the small flat metal "C", my car never came with them so I'm unsure of how those fit, but I assume they go on the inside of the bigger "C"
As for the small flat metal "C", my car never came with them so I'm unsure of how those fit, but I assume they go on the inside of the bigger "C"
Joined
·
1,735 Posts
1974 GTV Rear Side Window "Kink" Trim
I'm reassembling my 1974 GTV. I have these two trim pieces that I am having trouble figuring out how they should be installed. The Inner/shinier of the two parts is pretty straight forward. It goes inside and covers the end of the top and bottom trim parts. But the smaller peace I'm...
www.alfabb.com
1 - 4 of 4 Posts
Join the discussion
Join now to ask and comment!