Alfa Romeo Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
749 Posts
Discussion Starter #1
As you know, I installed my 12.19 vented disk on the front of my 84 spider,a few years ago, also installed the brembo 4 pot calipers from a 1997 Porsche boxster onto the car. After a lot of work and many measurements,and designs. I have made the prototype mounts for the same 12.19" vented disk for the rear of the car, with the brembos from the same Porsche boxster
I was only off 3 mm, but I designed that into the prototype ( prototype is made of cherry wood ) easy to work with, and dense enough to put all the parts onto the rear axle. Now for some minor work, I can now make the mounts out of t6 aluminum. Sorry for no photos of the mount, like to keep that to myself. But will post photos of the disk and caiplers soon.
 

·
Registered
Joined
·
749 Posts
Discussion Starter #3
Cardboard cutout of a 12.19" disc. To get better idea. Prototype mount was not centred durring drilling, my fault,
IMG_20200402_194319_5.jpg
IMG_20200402_192926_7.jpg
IMG_20200402_193008_5.jpg
 
1 - 3 of 3 Posts
Top