rear axle limited strap

1 - 1 of 1 Posts

franco-veloce

Registered

Joined Feb 22, 2006

2,547 Posts

Discussion Starter • #1 • Mar 19, 2015

Hi All

can someone give me the exact size and center to center of the holes

I am going to make a exact copy of the Original

Rgds Franco

1 - 1 of 1 Posts

Recommended Reading

ZF "Kidney-shaped" steering gear

Giulietta & Giulia (1954-65)

Would like to correspond with people who have rebuilt 750 and very early 101 "Kidney-shaped" steering gears. NOTE: the "square-shaped" (2nd photo) steering gears are completely different inside, so they are not of interest.
- 7
- 193
- carl750 · updated 6 h ago
FIRST 100 Giulietta Sprint Veloce

Giulietta & Giulia (1954-65)

Le prime 100 Giulietta Sprint Veloce (telai serie AR1493 ‑ motori serie AR1315) Numero Numero Data di Colore Primo proprietario Note di telaio di motore produzione 01380 30001 24.04.1956 Rosso Carlo Guarneri, Brescia 01381 30002 23.04.1956 Rosso Scipione Paon, Verona 01430 30003 04.05.1956...
- 35
- 8K
- Marco750B56 · updated 11 h ago
Giulietta Veloce plenum and air filter wanted...

Giulietta & Giulia (1954-65)

I am currently rebuilding a 1300 Veloce spider engine, but I am missing the air plenum to attach to 40 DCOE 2 carbs, and the air box. Any condition considered. There are brand new reproduction options available online, but the prices are eye watering. Any help would be appreciated
- 9
- 612
- Tim Jones · updated 13 h ago
Soft top bolt dimensions

Giulietta & Giulia (1954-65)

Can someone tell me the lengths of the shoulders for the bolts that hold the soft top frame together (1960 101 spider). I have all the frame components but they are held together by an odd assortment of fasteners. I think that there are three lengths of ~ 4, 6 and 8 mm. Is this correct...
- 3
- 859
- L
  Lo Fo SI · updated 1 d ago
Soft top frame

Giulietta & Giulia (1954-65)

I am attempting to refurbish a convertible top frame for a 1958 spider that is under restoration. I found a black material, like neoprene under a metal cover secured by two small rivets next to the spring loaded catches on the main support shaft where it is bolted to the body. Can someone...
- 9
- 3K
- 7
  750sprint · updated 1 d ago