Alfa Romeo Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
612 Posts
Discussion Starter #1
I`ve replaced a water pump today, it was not as bad as it could be,
removed the hood, radiator, afm box, belt, fan and.... im suck!
either socket 36mm or double nut thingy, well, i did not had to use any of that... and i did replaced my pump. how come you may ask, well, because PO was either an idiot or a genius (my bet is on idiot...) and that how my crank pulley is looking, and what allowed me to replace pump painless... i also inspected the belt and it does not look like it may have any problems...
and after closer inspection of crank pulley, it does not look like accident...

have a good day... (still have to put hood back on my alfa...)
 

Attachments

·
Registered
Joined
·
461 Posts
Besides balance, it look like it was cracked. Might be wrong, but I believe the pulley is cast and must have cracked.
 
1 - 3 of 3 Posts
Top