[jmplaysbass]

Hi all
So I replaced my points with an ignitor module, followed the instructions (or what there are of them), and since I installed it I havn't been able to get the engine to fire. I tried wiring it directly to the coil (3.5ohm), then to the orignal harness, neither worked, buzzed the line out, all have continuity. Has anyone had any luck installing these things/did any of you have to modify the module mounts?

 

[jmplaysbass]

I think the module it's self is too far from the lobe, the mounting points are almost drilled through the outside of the plate. I tried the other day setting the timing ranging +/- 40 degrees from where it was set with points and nothing

 

[jmplaysbass]

thanks everyone for the suggestions, Roadtrip hit the nail on the head, the factory mounting holes were miss-drilled, rebored the holes, set the spacing, and my alfa fired right up