I just rebuilt all 4 front wheel cylinders, master cylinder, replaced the rear cylinders with new ones and replaced the soft lines. I have no visible leaks anywhere, but after 3 rounds of bleeding (2 person style) and seemingly a gallon of fluid, the pedal still goes to the floor until the 3rd...
I am searching for (4) 106 type valve keepers, part #106.00.03.300.00
Also the front crankshaft pulley nut part 106.00.02.105.00. I think it's 25 mm x 1.0
If anyone has these parts I'll gladly buy them, or if anyone knows of a supplier it would be much appreciated.
I live in Peru and own a 1982 alfetta-gtv 2.0 that I have redone over the last years. 60s ARs are quite rare now down here and it has become very difficult to find a 105 series car (coupé or sedan) to restore.
Luckily I´ve come across a 2006 sprint, the downside is that it is very...
Hi , I am struggling to remove the arms that go from the top of the rear axle to the frame , I cant move the arms as they seem to be stuck fast ,I need to remove them to fit new cone bushes ,is there anything I need to do or is just a case of getting more brutal with it. Cheers Chris