Oil/fuel/water gauge lense replacement?

1 - 1 of 1 Posts

la_strega_nera

Registered

Joined May 2, 2007

1,265 Posts

Discussion Starter • #1 • Oct 1, 2007

The Oil Pressure/Temp and Water temp/Fuel guages on my 66 GT Veloce are very age yellowed (the piece of perspex that has Oil/Oil and water/fuel, I imagine it would be Olio/Benzina/Aqua on a euro spec car), are replacement perspex pieces available?

1 - 1 of 1 Posts

Join the discussion

Recommended Reading

Head gasket blown

GT (1963-1977)

Hi all my head gasket has just gone on my 1965 Giulia Sprint GT ,its got the original 1.6 engine ,what I need to know is , are these engines prone to warping on the head or the block ,I will have the head skimmed of course but I don't think I could get anything done if the blocks warped , any...
- 5
- 67
- C
  chris hedley · updated a moment ago
'67 GTV Restoration - Slow process, fast BB post

GT (1963-1977)

Hello fellow Alfisi, I bought this car 12 years ago (out of NYC via this BB), and just sat on it for the first 8 years. During those years I slowly collected the missing pieces to finish the restoration, buying NOS parts when I could and it made sense. Those 8 years were filled with...
- 11
- 182
- 1750GTV105.44 · updated 3 h ago
1969 GTV - The Phoenix

GT (1963-1977)

I think this is the real definition of insanity but I guess we're in the right forum for it... A random guy stopped by my shop a while back and said that he works for an impound yard and noticed that there was a car in the back that was similar to the cars he has seen around here. After a quick...
- 51
- 4K
- gprocket · updated 3 h ago
Engine identification (again)

GT (1963-1977)

I recently got a 1300 GT Junior of 1975. Previous owner told me that engine was replaced with 1600 (actually 1570cc). However engine full number is AR16000*55851 and I cannot find from which model was removed nor any other info. I have a concern regarding correct spares based on engine type. Are...
- 7
- 401
- Aris64 · updated 3 h ago
Door striker/latch missing parts

GT (1963-1977)

Hello everybody, yesterday I wanted to install my doors and I could not find the part, which takes the srews of the striker/latch at the b-pillar. I have a picture before disassembly, but the doors were taken off by someone else. I think it looks like there has to be some kind of plate with 3...
- 8
- 118
- Christalfa · updated 5 h ago