Alfa Romeo Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
713 Posts
Discussion Starter #1 (Edited)
I bought this 2L NovaMotor longblock in professionally rebuilt running condition but when disassembled for inspection found that the #2 main bearing saddle was cracked (15:1 cr can do that) Nova used a stock Motronic Nord block that is milled down with a removable monoblock liner added so could be repaired. As I will not be using it I would like to sell it for parts rather than rebuilding myself (have a day job and other projects).

Have to offer:

-Complete Novamotor 2L Longblock (hairline crack in #2 main bearing saddle) from pan and oil pump to all drives to oversize valve TS75 head, cams, cam drives and covers ect. Like new Nova billet crank, rods, pistons, like new monoblock liner, complete.

-Long runner Nova individual throttle body fuel injection including single inlet restrictor F3 airbox
- no electronics - no ignition.

-Nova F3 flywheel for use with AP/Tilton clutch (no clutch)

$4500 obo. Interesting trades considered. International buyers welcome.

[email protected]
417-849-4673
 

·
Registered
Joined
·
713 Posts
Discussion Starter #4
Bump. I would take an uncut 1600 crank or cranks and/or Giulia 101 Spider taillight housings in good condition as partial trade.
 
1 - 4 of 4 Posts
Top