Joined
·
21,375 Posts
NOS Super wiper cowl on ebay
1 - 5 of 5 Posts
Joined
·
1,085 Posts
Joe, I have one that I'll sell, (and it is probably 4000 miles closer). How about $25.00 plus UPS??
Joined
·
133 Posts
Whats the condition?
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
Super getting some localized bodywork
Sedan (1962-1977)When I got my Super 15 years ago, it was nasty looking with dents, some bondo, a really nasty RR door, and poor paint, but luckily not much rust. I had the body done by a place in San Rafael in 2003 (now out of business, as seems to be the case with most body shops). They stripped it to bare...- 249
- 32K
-
Andrew · updated
-
Dashboard vs. Sun - Any recommendations?
Sedan (1962-1977)Good day fellow Alfisti I have just joined, and am researching a potential project. I’m in the UK and wondered if anyone has advice when it comes to renovation or sourcing replacement for 105 saloon dash tops. I only have photos, so potential full extent is unknown, but imagine a big rodent took...- 11
- 220
-
CheBellaMacchina · updated
-
2.0 Conversion: Misc
Sedan (1962-1977)Thought there may be some interest in this. Installed a powersports (ATV) battery just to sort out the elec system. Very happy with installation as battery is quite small. Has 385 cold cranking amps. Not sure if thats strong enough to crank it up for normal use, but it turned over motoe...- 7
- 202
-
Spring specifications for a fast road Super
Sedan (1962-1977)There has been a backroom discussion going on amongst a couple of us regarding the best spring specifications for a "fast road" Super. The challenge is that various vendors offer sport suspension springs for the Giulia Super that are advertised vaguely in terms of specifications and results...- 70
- 17K
-
dmericas · updated
-
Master cylinder reassembly help please
Sedan (1962-1977)Rebuilding a m/c for a standing pedal 1967 Super. It has a single booster and single circuit brakes. When disassembling, my rag slipped and compressed air blew parts a few feet to the back of my workbench. Looking for the correct order of and orientation of the parts. Could not find a graphic...- 15
- 302
Join now to ask and comment!