Alfa Romeo Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
5,977 Posts
Discussion Starter #1 (Edited)
I'm looking for any stashes of NOS studs for Giulietta/Giulia models. These would be used for e.g. inlet plenums, timing chain covers, front/rear of the engine block, cylinder head, transmission cases etc. I do not need the long main studs which hold the cylinder head to the block.

Sizes are M6 or M8, and I'm particularly looking for any of the following (quantities per vehicle given in bold):

Block
2100.05108 - 6 x 1.0 x 39 (2)
2100.05895 - 6 x 1.0 x 34 (3)
2100.05904 - 6 x 1.0 x 57 (2)
2100.05986 - 8 x 1.25 x 8 x 1.0 x 30 (4)
2100.08889 - 6 x 1.0 x 20 (2)
2100.08997 - 8 x 1.25 x 8 x 1.0 x 23 (6)
2100.10940 - 6 x 1.0 x 77 (1)
2100.10941 - 6 x 1.0 x 92 (1)
2100.10942 - 6 x 1.0 x 97 (1)
2100.10943 - 6 x 1.0 x 87 (1)

Timing chain cover
2100.05106 - 6 x 1.0 x 34 (7)
2100.05138 - 6 x 1.0 x 24 (1)
2100.05893 - 6 x 1.0 x 30 (1)
2100.05896 - 6 x 1.0 x 37 (2)

Cylinder head
2100.05189 - 8 x 1.25 x 8 x 1.0 x 26 (6)
2100.05192 - 8 x 1.25 x 8 x 1.0 x 32 (12)
2100.05194 - 8 x 1.25 x 8 x 1.0 x 37 (2)
2100.05200 - 8 x 1.25 x 8 x 1.0 x 52 (12)

Sump
2100.08889 - 6 x 1.0 x 32 (4)
2100.08891 - 6 x 1.0 x 37 (4)

Plenum
2100.05100 - 6 x 1.0 x 21 (2)
2100.05105 - 6 x 1.0 x 30 (4)
2100.05206 - 8 x 1.25 x 8 x 1.0 x 62 (2)

Differential
2100.05102 - 6 x 1.0 x 25 (8)
2100.05984 - 8 x 1.25 x 8 x 1.0 x 41 (2)
2100.08977 - 8 x 1.25 x 8 x 1.0 x 36 (7)

Main priorities are the studs for timing chain cover, inlet plenum and sump. Can be in virtually any condition as I will be replating them anyway, but I am not looking for used items unless the threads are perfect and there are no tool marks. These are for a long-term personal project that I am attending to when time and funds allow. Can anyone help?

Thanks in advance,

Alex.
 
1 - 1 of 1 Posts
Top