Alfa Romeo Forums banner

1 - 17 of 17 Posts

·
Premium Member
Joined
·
1,966 Posts
Discussion Starter #1
59DDD8FE-65A4-40AD-B5DE-05503981462B.jpeg
52AAEB25-D444-4865-9C01-6622D43F7852.jpeg
DF28F63D-2545-4D34-B767-700523518982.jpeg
643E3AD9-900B-453D-8AB2-A30E3671FC74.jpeg
4C853B37-EE67-4156-8917-54CC1DFC9E8A.jpeg
I have 2 sets of 105.14 NOS brake backing plates, I have 3 of the 4 part numbers:
105.14.22.116.04
105.14..22.115.03 rears
and 105.14.22.050.00, numbers could be off, missing part number is the opposite of last number, left side. Looking for $140 shipped to lower 48
 

·
Premium Member
Joined
·
22,984 Posts
Not just hen's teeth, but hen's wisdom teeth. Cool. These for Dunlops you think?
Andrew
 

·
Premium Member
Joined
·
1,966 Posts
Discussion Starter #3
I will see if I can find my parts manual and look them up stay tuned
 

·
Registered
Joined
·
1,145 Posts
105.14.22.115.03 is the ATE to DUNLOP upright front left shield for ATE GT Veloce 1600 (Version 2: Group 2), also found on GTJ 1300 up to body numbers LHD 1211000 and RHD 1290250.(four large holes on shields)
105.14..22.116.03 is the ATE to DUNLOP upright front right shield for GT Veloce 1600 (Version 2: Group 2) also found on GTJ1300 up to body numbers LHD 1211000 and RHD 1290250.(four large holes on shields)

105.14.22.050.00 is the DUNLOP front right shield for GT Sprint, GTC and GT Veloce 1600 version 1 all with Dunlop brakes.(four large holes on shields)
105.14.22.049.00 is the DUNLOP front left shield for GT Sprint, GTC and GT Veloce 1600 version 1 all with Dunlop brakes.(four large holes on shields)

105.14.22.115.04 front left shield for solid ATE uprights GTJ 1300 (From body numbers LHD 1211001 and RHD 1290251).(two small holes and two large holes on shields)
105.14.22.116.04 front right shield for solid ATE uprights GTJ 1300 (From body numbers LHD 1211001 and RHD 1290251). (two small holes and two large holes on shields)

When version 3 of the GT Veloce 1600 was made were they used the high arch bodies and used the solid ATE uprights as per GTJ 1300 (From body numbers LHD 1211001 and RHD 1290251)

I'm interested in them, plus cost of shipping to Australia

Regards Steve
 

·
Registered
Joined
·
686 Posts
Of course all of these parts will also fit & are found on any of the Spiders, Supers, & Ti's of the same period.
 

·
Premium Member
Joined
·
22,984 Posts
I was interested historically and not to put on a car, so go for it.
Yes, love seeing this stuff. Don't forget, GTA too, right, for legal cars with Dunlops.
I just went through a set of Dunlops on a Fulvia GT, which are the same in theory other than a different, better, parking brake setup on the back, more like Jag and MGA Twin Cam.
Andrew
 

·
Registered
Joined
·
686 Posts
Andrew, FYI, none of these will fit a GTA Dunlop front. GTA 1600 has a unique backing plate for that upright. Number is a 10532......
Vince.
 

·
Registered
Joined
·
1,145 Posts
On reviewing numbers
105.14.22.115.00 is Left side ATE solid rotor with solid upright(late GTJ1300 or version 3 GT Veloce 1600 so possibly the hand written note on the shield is in error.
Thats why I can't find 105.14.22.116.00 in the parts manuals.

105.14.22.049.00 is Left side DUNLOP GT Sprint, GTC and version 1 of GT Veloce 1600
 

·
Premium Member
Joined
·
1,966 Posts
Discussion Starter #11
Willing to sell individually for $30 each plus actual shipping.
 

·
Registered
Joined
·
1,145 Posts
The only ones I can use are for my
version 2 Gt Veloces 1600
105.14.22.115.03 is the ATE to DUNLOP upright front left shield for ATE GT Veloce 1600 (Version 2: Group 2), also found on GTJ 1300 up to body numbers LHD 1211000 and RHD 1290250.(four large holes on shields)

For my early Dunlop GT Veloces 1600 version 1
105.14.22.050.00 is the DUNLOP front right shield for GT Sprint, GTC and GT Veloce 1600 version 1 all with Dunlop brakes.(four large holes on shields
and
105.14.22.049.00 is the DUNLOP front left shield for GT Sprint, GTC and GT Veloce 1600 version 1 all with Dunlop brakes.(four large holes on shields)

and for my GTJ1300
105.14.22.116.04 front right shield for solid ATE uprights GTJ 1300 (From body numbers LHD 1211001 and RHD 1290251). (two small holes and two large holes on shields)

Please advise on quantity of each of the part numbers above and postage cost.
Regards Steve
 

·
Premium Member
Joined
·
1,966 Posts
Discussion Starter #13 (Edited)
The only ones I can use are for my
version 2 Gt Veloces 1600
105.14.22.115.03 is the ATE to DUNLOP upright front left shield for ATE GT Veloce 1600 (Version 2: Group 2), also found on GTJ 1300 up to body numbers LHD 1211000 and RHD 1290250.(four large holes on shields) I have only 1, 105.14.22.115.03

For my early Dunlop GT Veloces 1600 version 1
105.14.22.050.00 is the DUNLOP front right shield for GT Sprint, GTC and GT Veloce 1600 version 1 all with Dunlop brakes.(four large holes on shields
I have 3 of these
and
105.14.22.049.00 is the DUNLOP front left shield for GT Sprint, GTC and GT Veloce 1600 version 1 all with Dunlop brakes.(four large holes on shields) I have 3 of these

and for my GTJ1300
105.14.22.116.04 front right shield for solid ATE uprights GTJ 1300 (From body numbers LHD 1211001 and RHD 1290251). (two small holes and two large holes on shields)
I have 2, 105.14.22.116.04
Please advise on quantity of each of the part numbers above and postage cost. Shiping will be by actual weight, 6 pounds is around $75 USD, 7# around $83 USD. It appears the only ones I have that you need are the Dunlop versions, shipping weight for 2 of these would around 4 pounds. I am attaching pics showing what I have, as well as the two versions that lack the .03 and ,04 suffixes.
Regards Steve
41A19CEF-A708-4128-A538-F51B91324EC0.jpeg
0307D521-754F-438D-A54F-CF506D9C87A9.jpeg
 

·
Registered
Joined
·
1,145 Posts
Hi Fran,
I'll take the one 105.14.22.115.03 and
two of 105.14.22.050.00 and two of 105.14.22.049.00 for my two early Dunlop GT Veloces 1600 version 1 cars
and one 105.14.22.116.04 for my GTJ 1300.
Regards Steve
 

·
Premium Member
Joined
·
1,966 Posts
Discussion Starter #16
This what I have left if anyone is interested, $30 each plus shipping
317AFA09-E05B-42C4-AF52-F9A4F8A3AF61.jpeg
420D057B-9EBA-4A95-B02F-7F3B64981CBA.jpeg
B615CFD8-7286-42A7-8080-8DCE06549879.jpeg
D8CBE743-089D-4E29-A582-6001E232664E.jpeg
E221BB14-64D0-4E16-A531-70D0B4C85AC1.jpeg
 

·
Premium Member
Joined
·
1,966 Posts
Discussion Starter #17
As stated earlier, these will fit other early 105 series variants, not just TI's
 
1 - 17 of 17 Posts
Top