Alfa Romeo Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
2,539 Posts
Discussion Starter #1 (Edited)
How many times have we seen the stainless steel or chrome sill trim un-lovingly attached to an Alfa with sheet-metal screws ?
While I cannot repair such screw holes in your trim .. I can offer a solution for long lasting and reusable hardware to properly install the sill spears.

New production hardware in stainless steel for
Part # 101.03.59.015.00 - Plate, fixing moulding
These are the forked plates that slide into the front and rear ends of the sill trim, often missing or rusted beyond use.
Four are used per vehicle with a 6mm stud which affixes the trim firmly to the body.
My kit of four plates also includes four stainless steel washers and nyloc nuts.

These kits are available for $50 + shipping
Shipping costs are $5 in USA, other countries - ask for a quote.
Private Message me if interested.
 

Attachments

·
Administrator
Joined
·
3,807 Posts
The ones on 10990 are lovingly held on with gutter bolts, courtesy of a dumb PO......:frown2:

At last, a decent & long lasting alternative !!

PM sent

Thanx
Greig
 

·
Registered
Joined
·
2,539 Posts
Discussion Starter #3 (Edited)
Buy your Giulietta - Giulia Spider stainless steel sill trim fasteners.

$50 + shipping ($5 in USA, other countries - ask for a quote)

PayPal works, checks or money orders accepted.

Send a PM and order yours now.
 

Attachments

·
Registered
Joined
·
2,539 Posts
Discussion Starter #4
To all those who have purchased my items - I thank you.
This message is to inform others that, at present, the supply on hand of these stainless steel sill trim plates [Part # 101.03.59.015.00] is temporarily exhausted.
However .. production of additional plates is underway and should be available for distribution within a week.

Orders will be accepted and fulfilled in the order of receipt of payment.

Price will be maintained at $50 per set of 4 stainless steel plates + $5 shipping - within USA
 

·
Registered
Joined
·
2,539 Posts
Discussion Starter #5
For Sale - UPDATE

Back in Stock

Inventory of stainless steel sill spear plates (Part # 101.03.59.015.00)
has been replenished. :thumbup:

All current orders with payment received will be shipped this week.
New orders will be shipped promptly - normally within a day or so of receiving the order.

Note: as with any stainless steel thread, some form of anti-galling lubrication should be used when installing.
http://greensladeandcompany.com/wp-content/themes/greenslade-theme/pdf/articles/problem-solving/Problem%20Solving-Stainless%20Steel%20Galling%20Solutions.pdf

$50 per set of 4 stainless steel plates + $5 shipping within USA
PayPal works well.
To order:
PM or email: GTDolak a t G mail d o t com
 

·
Registered
Joined
·
2,539 Posts
Discussion Starter #6 (Edited)
Standard set

A Clarification ..
This post is meant to clarify what is being offered and what a buyer should expect to receive when ordering these sets of stainless steel sill spear fastening plates for an Alfa Spider.

The standard plates will be supplied with the threaded stud welded in place and the plates will have a matte finish as shown below.
The type of nuts supplied can be specified - nyloc or keps (K-nuts) - shown below
If none is specified the set of four plates may be fitted with either one of these types.

The head of the screw will be welded at no less than two points - this has proven to be more than mechanically sufficient.
Variations in the welds are to be expected and will not necessarily look exactly as those pictured below.
Some small irregularities along the edges may occur - these will not compromise the function of the hardware.

Price: $50 + $5 shipping = Total $55 for one set of four stainless steel plates with washers and nuts.
Shipping cost stated is within the USA; for international orders please message for shipping quote.

Order at: GTDolak at gmail dot com

Optional finishing is available - see next post
 

Attachments

·
Registered
Joined
·
2,539 Posts
Discussion Starter #7 (Edited)
Silver Solder option

Optional fastening
Optional fastening of screw to matte finish plate using silver solder pictured below - this results in a very uniform appearance.
The additional cost is due to the expense of jeweler quality silver solder.

Price: $60 + $5 shipping = Total $65 for one set of four stainless steel plates with washers and nuts.
Shipping cost stated is within the USA; for international orders please message for shipping quote.

Order at: GTDolak at gmail dot com
 

Attachments

·
Registered
Joined
·
2,539 Posts
Discussion Starter #8 (Edited)
Only for a few

Another choice

Optional polished finishing for Alfa Spider stainless steel sill spear fastening plates

Optional silver solder fastening plus polished finishing of stainless steel plates as pictured below.

Price: $75 + $5 shipping = Total $80 for one set of four polished stainless steel plates with washers and nuts.
Shipping cost stated is within the USA; for international orders please message for shipping quote.

Order at: GTDolak at gmail dot com
 

Attachments

1 - 8 of 8 Posts
Top