Joined
·
940 Posts
New Updates on electrical boots available soon at Auto Italia Sportiva | Sharing my passion for Alfa Romeo restoration, and metal, fabrication.
New electrical boots
1 - 4 of 4 Posts
Joined
·
213 Posts
Same thing here !
Joined
·
1,975 Posts
Great Lionel, would you also be considering the ones that sit and cover the rear cabel connections of the rear lamps? Don´t remember now if they did only on Sprints, or Spiders as well....
Dennis
Dennis
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
Giulia 1600 Sprint - Weber DCOE or DCD?
Giulietta & Giulia (1954-65)I was hoping to canvas some informed opinion as I start planning and budgeting the restoration of my 101.12 Sprint. I appreciate the options I have regards engine internals and head work, but am undecided whether the pursuit of DCOEs and all that entails is proportionate in terms of effort...- 5
- 93
-
DCO3 linkage lengths
Giulietta & Giulia (1954-65)This question only applies to 750 Veloce with DCO3 Webers. Is the photo of Bell Crank 1365.67.707 (early Veloce - described as "L-shaped with welded spacer") or it is 1365.67.718 (later Veloce described as "Two levers welded to spacer")? The Spare Parts Catalog specifies different length...- 8
- 140
-
carl750 · updated
-
Need Hardware Sizes for Hood, Door and Trunk Latches on 58 Spider
Giulietta & Giulia (1954-65)I'm finally getting around to installing the hood latch, door catch and trunk latch mechanism on my 58 Spider. My painter lost the original hardware, so I need to know what size/type bolts, nuts, screws, etc... are needed to install these parts. Here are some photos showing the hardware I need...- 0
- 48
-
Necessary parts?
Giulietta & Giulia (1954-65)I've seen these for sale on both the CA and AS websites, but neither of these parts are to be found in either the Giulietta or Giulia parts catalogs. PEDAL BOX SPACER PLATE & PEDAL BOX RUBBER SEAL Are these necessary? If not, how did they come into use? Thanks, Ray- 3
- 134
-
Raimondo · updated
-
Giulietta Sprint Veloce -61 abnormal restoration
Giulietta & Giulia (1954-65)So I'm starting a new thread to tell a bit about the restoration of my Giulietta. More info soon. But first I have a question. The upper frame rails that hold the front upper suspension arms are slightly banana shaped (see picture). The picture is taken from above and both inner and outer...- 282
- 66K
Join now to ask and comment!