[junglejustice]

Any ideas on this connector? It is from an automatic transmission 1995 164 LS (Super) 24 valve car...

It is located on the driver - US left - side of the car up close to the fire-wall. It comes from the auto transmission harness as a blue with black stripe wire to some weird little round connector and continues in to the engine ECU harness as a white with black stripe wire...

I am converting the car to manual and this wire goes away with the auto harness - any ideas...? Any other functions that may be effected by removing the auto control unit and harness completely?

 

[Alfisto Steve]

Any ideas on this connector? It is from an automatic transmission 1995 164 LS (Super) 24 valve car...

It is located on the driver - US left - side of the car up close to the fire-wall. It comes from the auto transmission harness as a blue with black stripe wire to some weird little round connector and continues in to the engine ECU harness as a white with black stripe wire...

I am converting the car to manual and this wire goes away with the auto harness - any ideas...? Any other functions that may be effected by removing the auto control unit and harness completely?

See page 230 in 94 wiring diagram for CAE (electronic) A/T looks like would be connector G347 for N68 ECU to ground tranny oil cooler relay I63.

 

[junglejustice]

Oh good! Well thanks - that's gone now too!