Alfa Romeo Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1,319 Posts
Discussion Starter #1
Hi, who do you guys like for a machine shop around here? I'm actually located in Hillsboro, but I know that most of the shops are probably in Portland...

I'm thinking of rebuilding an S3 engine for fun, then replacing mine when it goes south. I've rebuilt an M10 BMW engine before, and used Dan Hall Automotive in Portland. It sucked driving there and back...

So, who do you guys like and trust that can bore, work with the wrist pins, polish the crank, head work, etc?

Thanks-
John
 

·
Registered
Joined
·
869 Posts
Machine shop

Brian at bearing Services does all the Alfa's in town
1040 Nw Everett St, Portland, OR 97209
Cross Streets: Near the intersection of NW Everett St and NW 11th Ave
Neighborhoods: Pearl
(503) 222-1366

Good luck!
 

·
Registered
Joined
·
1,319 Posts
Discussion Starter #3
Walked past that business many times. Good to know! One of my co-workers had them rebuild his BMW engine last year.

Thanks Neil,

John
 

·
Premium Member
Joined
·
166 Posts
Bump. This was several years ago. I am starting to rebuild my 2600 engine and want to be sure the machine work is done correctly for the vintage.
Thanks,
RickP
 
1 - 4 of 4 Posts
Top