Alfa Romeo Forums banner

1 - 13 of 13 Posts

·
Registered
Joined
·
84 Posts
Discussion Starter #1
OOPS I posted on the wrong page.

I would like to do a Twin Spark conversion to my 74 GTV does anyone know where I can purchase an engine with all of the necessary components.

Thanks
Adrian
 

·
Registered
Joined
·
571 Posts
german twinspark

i like the engine on the german ebay, but i don't
understand german and couldn't find a 'translate' button.
my questions:
- does it have a drilled crank for pilot bushing?
- does it come with full electrical/intake equipment?
- does it have an O2 sensor?
- is it a new engine or has it been rebuilt?

> danke,

john :)
 

·
Registered
Joined
·
571 Posts
note: because this is your thread, adrian, i won't bid on the engine listed above. i'll pay attention to other engines available on german ebay, and see if i can get answers to the questions above in preparation for that.
 

·
Registered
Joined
·
357 Posts
roller said:
i like the engine on the german ebay, but i don't
understand german and couldn't find a 'translate' button.
my questions:
- does it have a drilled crank for pilot bushing?
- does it come with full electrical/intake equipment?
- does it have an O2 sensor?
- is it a new engine or has it been rebuilt?

> danke,

john :)
Go to babelfish, just google it and translate at this wonderful site.
 

·
Registered
Joined
·
127 Posts
Hi there,
i have nothing to do with the mentioned EBay- Engine, and the auction is already over (perhaps it comes again), but as i´m german i could translate a bit:
"virgin" engine (totally new), seems to be from the stock from an alfa dealer/shop
no wiring harness, intake manifold, exhaust and other parts attached to the engine (as seen on the Photo) are included
hole in the crank: you have to ask the seller, that can´t be seen...

Thomas
 

·
Registered
Joined
·
528 Posts
They are trying to move that engine for a lot of money. This is the company selling (their site isn't easy to navigate but you'll find it).

It is factory new, never been used and is exclusive of all ancillary parts such as injection, manifolds, generator, cables etc. Also, I don't expect it to be drilled for the pilot bushing but that is a minor thing.
 

·
Registered
Joined
·
571 Posts
danke, nda9h for the translation.
i'll try the babelfish, storsav.
i'm wondering if the electricals/intake can be purchased separately?

john
 

·
Registered
Joined
·
1,817 Posts
Cabreh: even with a 16% discount 8500.00 EUROS! I would expect a little Italian guy to come with it to put it in! That's like 14,000 US. Wow! you were not joking.
 
1 - 13 of 13 Posts
Top