[yvesmontreal]

Beware. I've just zapped "William Chris". A new member who offers exactly the part you are looking for is suspicious. In this case, he posted the same answer to 5 want ads. More than suspicious.
This behaviour is a typical spam.

 

[Alfa72NY]

Beware. I've just zapped "William Chris". A new member who offers exactly the part you are looking for is suspicious. In this case, he posted the same answer to 5 want ads. More than suspicious.
This behaviour is a typical spam.

Thanks, the amount of scammers is insane.

 

[Mark_toro]

That looks quite challenging. Might be hard to find that section. I have had good luck getting 20 Gage 1" X1" angle strips from a local metal supply house and fabricating areas like this using the Harbor Freight shrinker / stretcher. Harbor Freight Tools – Quality Tools at Discount Prices Since 1977
Buy the stand too.

 

[PSk]

This panel might help you: NOS from1970, GTV, A-pillar inner support., but I believe somebody might have already called dibs

I don't know what to say that is helpful. Even if you could get all genuine original panels, fitting them so the windscreen aperture is 100% correct would surely require a jig. So maybe that is a helpful comment: If you have not already, I would have a very solid jig that locates all the panels that make up the windscreen frame aperture. Does not have to be beautiful, but if all the important points end up as they were, your windscreen will fit and seal. Eveything else does not matter as will mostly be hidden
Pete