My original 101 rear panels look like this: two short, two long, configured as shown. The panel with the tied string is the one with the manual pocket. Late Giulietta. Not sure if the Giulias clips were used differently.
Would like to correspond with people who have rebuilt 750 and very early 101 "Kidney-shaped" steering gears.
NOTE: the "square-shaped" (2nd photo) steering gears are completely different inside, so they are not of interest.
Le prime 100 Giulietta Sprint Veloce
(telai serie AR1493 ‑ motori serie AR1315)
Numero Numero Data di Colore Primo proprietario Note
di telaio di motore produzione
01380 30001 24.04.1956 Rosso Carlo Guarneri, Brescia
01381 30002 23.04.1956 Rosso Scipione Paon, Verona
01430 30003 04.05.1956...
I am currently rebuilding a 1300 Veloce spider engine, but I am missing the air plenum to attach to 40 DCOE 2 carbs, and the air box.
Any condition considered.
There are brand new reproduction options available online, but the prices are eye watering.
Any help would be appreciated
Can someone tell me the lengths of the shoulders for the bolts that hold the soft top frame together (1960 101 spider). I have all the frame components but they are held together by an odd assortment of fasteners.
I think that there are three lengths of ~ 4, 6 and 8 mm.
Is this correct...
I am attempting to refurbish a convertible top frame for a 1958 spider that is under restoration. I found a black material, like neoprene under a metal cover secured by two small rivets next to the spring loaded catches on the main support shaft where it is bolted to the body. Can someone...