I will keep this short but please feel free to share or ask any questions you would like. I have a 79 Alfetta GT that I have been building for NASA TT, Hill Climb Racing, Autox, Or just open track days and my own enjoyment. Over the past 4 years I have gathered up some of the best parts I could find around the world for this thing. In the past I have done the "buy the cheaper part because it does the same thing" routine later to be let down that it does not perform how I would want. So, this build received nothing but the best! I will post pictures of everything I have but here is a list as well. This listing is for the car complete with all of the parts seen less the wheelset but I am happy to discuss those if you are interested.


  • GROUP 2 FENDER FLARE KIT WITH FRONT SPOILER
  • WORK CR01 WHEELSET CUSTOM SPECD FOR THIS BUILD. 16X9 -16 5X98
  • 245/40/16 YOKOHAMA A052 TIRES STILL WITH STICKERS
  • INTRAX 1K2 COILOVER SET
  • EQUAL LENGTH AND LONG TUNNER HEADERS FROM EXTREME TUNING IN BULGARIA
  • TAROX BIG BRAKE KIT WITH RACE PADS AND STAINLESS LINES. ALUMINUM HATS
  • HIGH CAPACITY ALUMINUM RADIATOR
  • RACE UPPER CONTROL ARMS FROM CSR IN ENGLAND
  • RACE ALUMINUM FRONT HUBS FROM CSR
  • REAR DE-DION PIVOT FROM CSR
  • COMPLETE 3.0 DRIVETRAIN SWAP INCLUDING AXLES, DRIVESHAFT, CLUTCH, GEARBOX, ETC.
  • LSD GEARBOX
  • ALFETTA GT GEARBOX
  • MILANO ENGINE HARNESS AND ECU
  • 3.0 FROM A LATER 164 WITH OIL SQUIRTERS
  • TRANSAXLE OIL PAN
  • 2 SETS OF CAM COVERS
  • COMPLETE ENGINE GASKET SET FROM CENTERLINE
  • ENGINE MOUNTS FROM CENTERLINE
  • THREMOSTAT AND HOUSING FROM CENTERLINE
  • ALL OE COMPENENTS FOR THE SWAP FROM 2 SEPARATE MILANOS AND THE ALFETTA
  • ALUMINUM VERDE FRONT BREMBO CALIPERS
  • FRONT AND WHEEL BEARINGS AND SEALS FROM CENTERLINE
  • ALUMINUM LUG NUTS FROM BLOX RACING
  • DE-DION WATTS LINK PIVOT FROM STT IN THE NETHERLANDS
  • 164 AND MILANO VERDE INTAKE MANIFOLDS
  • WATER PUMP FROM CENTERLINE
  • UPGRADED TIMING BELT TENSIONER AND DAYCO BELT FROM CENTERLINE
  • FERRARI 430 IGNITION TUMBLER WITH KEY (FIGURED i WOULD FIND A WAY TO MAKE THIS WORK)
  • BOXES AND BOXES OF MANY PARTS AND I AM SURE THAT i AM FORGETTING SOME THINGS HERE!
    Wheel Tire Automotive tire Motor vehicle Automotive lighting
    Tire Wheel Automotive tire Motor vehicle Hood
    Automotive tire Hood Tread Motor vehicle Bumper
    Wood Gas Engineering Electrical wiring Urban design
    Building Motor vehicle Automotive tire Car Mode of transport
    Tire Wheel Sky Car Vehicle registration plate
    Motor vehicle Automotive tire Hood Automotive design Automotive exterior
    Tire Wheel Automotive tire Vehicle Motor vehicle
    Automotive tire Crankset Motor vehicle Bumper Automotive exterior
    Light Automotive tire Motor vehicle Gas Auto part