[johndewaele]

All dash lights etc. work on my 74 Spyder except the "lights on" and "high beam" warning lights (on the console).
They just randomly stopped; I changed the bulbs but no luck. Electrics is not my strong point; I could use a few ideas on where to start looking.
Thanks in advance.

 

[bshorey]

Hey John,

Do you have voltage at the indicator bulbs? Are they still grounded?

I seem to remember voltage coming off one side of the low and high beam feeds from the switch, so if the lights are working, the feeds tonthe indicators should be ok as well. Probably worth confirming with a wiring diagram.

At any rate, measure for voltage at the indicators first. Measure against a good ground. if you have volts there, check the grounds. If you don't have volts, check the connections back to the column switch.

bs

 

[howndog]

If the blue light for high beam is not on, there maybe a problem with 1 or both headlamps .turn on the highs and check the headlights to see if they are on. If not check fuses 9 and 10(i think) they control right and left highs.You may need to wiggle or pinch them